For Complex & Reliable Interconnect
For Signal Integrity & Speed
For High Power & Harsh Environments
For Innovative Form Factors
PCB Assembly Technologies
PCBA Service Models
Value-Added Services
STENCIL
For Complex & Reliable Interconnect
For Signal Integrity & Speed
For High Power & Harsh Environments
For Innovative Form Factors
PCB Assembly Technologies
PCBA Service Models
Value-Added Services
STENCIL
We'd Love to Hear from You
Industries We Serve
Telecommunications & 5G
High-frequency, low-loss PCBs and reliable assemblies for 5G infrastructure, from core networks to antenna units.
Telecommunications & 5G: High-Frequency, High-Reliability PCBs & Assemblies
Headline: Engineered for the Network: Advanced PCBs for Telecommunications & 5G Infrastructure
Sub-headline: We deliver the signal integrity, thermal performance, and unwavering reliability required for next-generation communication systems, from core networking to the edge.
The Connectivity Backbone: Our Role in Your Ecosystem
The evolution from 4G to 5G and beyond demands a fundamental shift in hardware capabilities. Higher frequencies, massive MIMO, denser integration, and stringent reliability standards place extreme demands on the underlying PCB and assembly.
SENTAK provides PCB manufacturing and assembly solutions for telecommunications and 5G applications, including RF antenna modules, base station electronics, network switches, optical communication equipment, and high-speed digital systems.
We combine low-loss PCB materials, controlled impedance fabrication, multilayer and HDI manufacturing, precision SMT assembly, and DFM support to help telecom equipment manufacturers achieve specified electrical performance and consistent production quality. From prototype verification to volume manufacturing, our engineering team reviews stack-up design, material selection, thermal requirements, and inspection criteria according to each project.
Core Industry Applications We Enable
5G NR Infrastructure: Massive MIMO Antenna(AAU)Radio Units, Baseband Units(BBU), Distributed Units(DU), Centralized Units(CU).
Core Networking&Data Transmission: High-speed switches, routers, optical transceivers, and backhaul equipment.
Satellite&Microwave Communication: VSAT terminals, point-to-point radio links.
IoT&Edge Gateways: Industrial routers and aggregation devices.
Telecommunications PCBs must maintain stable electrical performance across high-frequency RF paths, high-speed digital interfaces, and power-intensive circuits. SENTAK focuses on the manufacturing factors that directly influence board performance.
| Engineering Challenge | Impact on Telecom Equipment | SENTAK Manufacturing Approach |
|---|---|---|
| High-Frequency Signal Loss | Increased insertion loss in RF transmission paths | Low-loss material selection, controlled copper geometry and stack-up review |
| Impedance Variation | Signal reflections and degraded transmission performance | Controlled impedance fabrication and agreed verification methods |
| Dielectric Stability | RF phase variation and inconsistent circuit behavior | Review of Dk, Df, frequency and temperature requirements |
| High-Density Routing | Limited routing space for BGA and high-speed interconnections | HDI structures, microvias and fine-line manufacturing |
| Thermal Management | Increased component temperatures in RF and power modules | Thermal via design review, copper distribution and appropriate substrate selection |
| Production Consistency | Electrical performance variation between manufacturing batches | Approved material specifications, process control and inspection requirements |
For telecommunications projects, we recommend confirming electrical requirements and critical manufacturing tolerances before finalizing PCB fabrication files.
Material Science & Technology Expertise for RF & High-Speed Designs
Selecting the right substrate is critical for electrical performance, loss management, and cost optimization. We guide and manufacture using the full spectrum of materials.
|
Application Segment |
Recommended PCB Material Types |
Key Performance Drivers |
|
mmWave Antenna & RF Front-End (28/39/77 GHz) |
Premium High-Frequency Laminates: Rogers RO3000®/RO4000® series, Taconic RF-35, Arlon CuClad®. |
Ultra-low loss (Df), stable Dk, smooth copper for minimal conductor loss at high frequencies. |
|
Power Amplifiers, Filters, LNAs |
Mid-Loss/High-Performance FR-4: Isola FR408HR, I-Tera MT40, Nelco N4000-13. |
Balanced electrical/thermal performance, cost-effectiveness for sub-6 GHz circuits. |
|
High-Speed Digital Backplanes & Switches |
Low-Loss Digital Laminates: Panasonic Megtron 6/7, Isola Astra® MT77. |
Controlled dielectric constant, low loss at multi-Gbps data rates (56G+ PAM4). |
|
Power Supply & Control Units |
High-Tg FR-4, Heavy Copper |
Thermal reliability, high current capacity, lead-free assembly compatibility. |
High-frequency telecom PCB performance depends not only on circuit design but also on manufacturing consistency. Copper etching, laminate processing, layer registration, and surface finishes can influence the final electrical characteristics.
Before fabrication, SENTAK reviews the following parameters:
| Design Parameter | Manufacturing Review |
|---|---|
| Operating Frequency | Confirm frequency range and relevant material properties |
| Dielectric Constant (Dk) | Review specified values at the relevant frequency and test conditions |
| Dissipation Factor (Df) | Evaluate material-related dielectric loss requirements |
| Copper Roughness | Review conductor loss sensitivity and available copper foil options |
| Controlled Impedance | Confirm target impedance, tolerance and measurement requirements |
| Multilayer Stack-Up | Evaluate dielectric thickness, reference planes and lamination compatibility |
| RF Trace Geometry | Review trace width, spacing, etching tolerance and copper thickness |
| Hybrid Material Stack-Up | Check material compatibility, bonding and thermal expansion |
| Thermal Requirements | Assess copper distribution, thermal vias and substrate construction |
| Surface Finish | Evaluate assembly requirements and effects on critical RF features |
For designs combining high-frequency RF circuitry with dense digital routing, our HDI PCB manufacturing capabilities can support the review of microvia structures, multilayer construction and fine-line manufacturing constraints.
SENTAK recommends completing DFM evaluation before production to identify potential electrical and manufacturing risks.
Our Value-Added Engineering&Manufacturing Services
Beyond fabrication,we provide integrated solutions to de-risk your design and accelerate time-to-market.
Signal Integrity Partnership
Control & Modeling: Tight-tolerance (±5-7%) impedance control for single-ended and differential pairs, supported by TDR testing validation.
HDI & Stack-up Design: Expertise in designing for high-density interconnects necessary for miniaturized RF modules.
Thermal Management Solutions
Thermally Optimized Designs: Integration of thermal vias,metal cores(MCPCB for PA modules), and strategic layer stack-ups for effective heat dissipation.
High-Reliability Assembly&Testing
RF Assembly: Accurate placement of 01005 components and fine-pitch BGAs. RF shielding and cavity assembly.
Testing Regime: In-house network analyzer for basic RF validation, comprehensive ICT/FCT, and environmental stress screening(ESS)upon request.
Why Partner with SENTAK for Telecom&5G Projects?
Deep Technical Understanding
We speak the language of RF and high-speed digital design,ensuring seamless collaboration.
Proven Supply Chain
Established partnerships with leading laminate suppliers(Rogers, Isola, Taconic, Panasonic)ensuring material authenticity and availability.
Quality Built for Longevity
Manufacturing and inspection to IPC-6012 Class 3/ACE Standards for telecom infrastructure,ensuring products withstand 24/7 operation.
From Prototype to Volume
Scalable production supporting your journey from initial R&D validation to global rollout.
Building Trust, One Board at a Time.
Partner with a manufacturer who understands that in medical devices, quality is measured in patient outcomes.
Other Industries
SENTAK provides reliable PCBA solutions for life-critical medical devices. Our products meet stringent quality standards for applications in patient monitors, diagnostic equipment, and wearable health tech, ensuring unwavering performance.
SENTAK provides robust PCBs and PCBAs for industrial automation and control systems. Our Industrial Automation PCB & PCBA solutions are built for harsh environments, ensuring reliable performance in PLCs, motor drives, HMIs, and robotics. We enable 24/7 operational resilience and uninterrupted productivity.
SENTAK manufactures robust PCBs and PCBAs for high-power and energy electronics. Our solutions, utilizing heavy-copper and advanced substrates, are engineered for reliability in EV charging, renewable energy inverters, and power conversion systems, enabling efficient and stable energy management.
Your Design Deserves Our Discipline.
Partner with a manufacturer where quality is a measurable, managed outcome.